23801 E. La Palma Ave., Yorba Linda, CA 92887 Ph. 714.692.8180 Fax. 714.692.5016
www.cobrausa-vtwin.com
01/20
*
Cobra
®
recommends you always wear a helmet while riding. Please never operate your motorcycle while under
the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.
Items Supplied >
1 - Detachable (BA) Chrome or Black Rack with
Latches
2 - 3/8
” I.D. Front Mounting Bushings
2 -
3/8” I.D. Rear Bushing Spacers
2 -
3/8” I.D. Rear Bushing Sleeves
2 -
3/8” I.D. Rear Bushings
4 -
3/8”-16 x 1-3/4” Button Head Bolts Zinc
Application(s) >
HARLEY:
SOFTAIL:
FLSL
2018 - 2020
FXBB
2018 - 2020
(
ONLY ABOVE MODELS AS OF JANUARY 2020
)
Instruction Manual >
Read all instructions carefully before installing your new Cobra
®
product!
1. Remove the front bolt from the right side fender rail and discard.
NOTE:
Remove one side only so the
fender does not fall resulting in possible scratches or damage to the fender or paint. See
FIGURE 1
.
2.
Install the front mounting bushing into the front hole using the supplied 3/8”-16 x 1-3/4” long
buttonhead bolt and tighten bolt securely. See
FIGURE 3
.
3. Remove the right rear fender rail bolt and discard. See
FIGURE 1
.
4. Assemble the supplied plastic bushing over the sleeve as shown in
FIGURE 2
. Make sure the
chamfered inner edge goes towards the wide end of the sleeve.
5. Install the rear bushing assembly as oriented in
FIGURE 3
, using the supplied 3/8”-16 x 1-3/4” long
button head bolt and tighten bolt securely.
602-2611 / 602-2611B
Page 1 of 3
DOCUMENT NO. 0017
REV. B
CONTINUED ON PAGE 2
FIGURE 1
REMOVE STOCK
FRONT BOLT
REMOVE STOCK
REAR BOLT
