www.cobratools.com
Cables
The metal cable should be thoroughly cleaned with water to prevent unpleasant odors
and the damaging effects of drain cleaning compounds.
CABLE REMOVAL & REPLACEMENT
• The cable is NOT attached to the inside of the auger. To REMOVE the cable
from the drum, continue to pull the cable from the drum until it is fully removed
from the drum
• To REPLACE the cable, first bend a 45˚ angle in the end of the cable end that
goes into the drum
• Continue to push the cable into the drum until complete
• Replacement cable part number is
90110
• ¼" x 25' music wire cable with open hook
SPECIAL
APPLICATIONS
