98-150471-A02
G-1
Appendix G
System messages
System messages
G
G.1
Event messages – overview
The SAILOR 900 VSAT High Power detects events during
• POST (Power On Self Test) – a self test performed at every power-up.
• PAST (Person Activated Self test) – started in the web interface
• CM (Continuous Monitoring) – automatically performed while the system is in
operation.
When the SAILOR 900 VSAT High Power detects an event that requires your action, it
issues an event message and the red Fail/Pass LED in the LED panel of the ACU is lit. As long
as an event is active, it is shown in the ACU display and the web interface (in HELPDESK >
Event list or click the event icon on the DASHBOARD).
State the Event ID when contacting your service partner.
The event description might contain a number of digits in brackets, e.g. (00000005). This is
supplemental information and used for service and diagnostics purposes.
Note
Active events and notifications are shown. As soon as the
event is cleared, it is not displayed any longer. It is then moved
to the Notifications section. Notifications are cleared after 24
hours.
SAILOR900HP.book Page 1 Monday, July 18, 2016 12:44 PM
