COBHAM Sailor 900 VSAT, Technical Manual

Page: 303 / 356

Supported commands
98-133966-G1 Appendix D: Command line interface D-5
DDDD
Command line interf
ace
D.2.6 modem
D.2.7 satellite
Command Description
modem
Shows a list of sub commands available, including a short
description.
modem name
Shows the VSAT modem name of the currently active satellite
profile (entered in the web interface).
modem model
Shows the currently active VSAT modem model (selected in the
web interface).
Table D-7: UCLI command: modem
Command Description
satellite name
Shows the name of the currently active satellite
profile.
satellite lon
satellite lon 1W
Shows or sets the longitude position of the
satellite, in degrees.
• 1.0W or 1.0E or -1.0 for west and 1.0 for east
satellite skew
satellite skew 3.7
Shows or sets an additional skew offset of the
satellite. Some satellite has additional skew
because they have been placed different in the
orbit. E.g. Optus satellites in Australia are offset -45
degrees. Most satellites have 0 degree skew offset.
• Skew of the satellite: –90° to +90°.
satellite max_inc
satellite max_inc 2.5
Shows or sets the maximum inclination of the
used satellite. Some satellites are old and are
therefore moving in larger circles in space. Setting
the maximum inclination will add this to the
SAILOR 900 VSAT acquisition window size used to
find the satellite.
• Maximum inclination of satellite 0.0° to 90°
satellite rx_pol
satellite rx_pol v
Shows or sets the current RX polarisation:
• v (vertical)
• h (horizontal)
Table D-8: UCLI command: satellite
SAILOR900TM.book Page 5 Monday, September 16, 2013 11:01 AM