Keypad and menus of the ACU
98-146706-A
Chapter 6: Configuration
6-39
Confi
guration
<Extern mute> = [X,x]
<Modem TX> = [m,M]
<ADU TX> = [a,A]
<Tx pol>=[-,H,V,L,R]
After 1 hour the display is dimmed to lowest intensity. Press any key to light up the display.
6.5.2
Navigating the menus
Use the keypad to navigate the menus.
• Press
OK
or
to select a menu item.
• Use the arrow keys
and
to go through the menu items or enter
a number, digit by digit.
• Use the arrow keys
and
to go through the settings and move
from one digit to the next.
• Press
OK
to select a setting.
• Press
again to move one level up. If applicable, confirm to store the new setting by
pressing
OK
.
6.5.3
The menu tree
In the menu tree you can see how the system has been configured. To enter satellite
information directly, use a connected PC and the web interface.
Figure 6-32: Antenna Control Unit, menu tree
MAIN
ANT
ANT-1
ANTENNA
MODEM
NETWORK
SATELLITE
EVENTS
POINTING
POLARIZATION
GPS
HEADING
VERSIONS
SERIAL NUMBERS
ANTENNA STATE
ELEVATION
AZIMUTH
ANT-2
RX POLARIZATION
TX POLARIZATION
ANT-3
LATITUDE
LONGITUDE
FIX TYPE
ANT-4
HEADING
ANT-5
SW VERSION
ANT-6
ACU
ANTENNA
MODEM
MODEM TYPE
TX ENABLE
RX LOCK
SIGNAL LEVEL
NET LED
STAT LED
TX LED
RX1 LED
RX2 LED
PWR LED
TEMP LED
FAN LED
NETWORK
PORT 1 IP
PORT 1 MASK
PORT 3 IP
PORT 3 MASK
PORT 4 IP
PORT 4 MASK
DEFAULT GATEWAY
SAT
POSITION
RX POLARIZATION
TX POLARIZATION
RX FREQUENCY
LNB LO
TX FREQUENCY
BUC LO
EVENT
<EVENT 1>
<EVENT 2>
<EVENT 3>
<EVENT 4>
SAILOR900Ka-IM-98-146706.book Page 39 Thursday, July 16, 2015 11:07 AM
