Satellite profiles and VSAT modem profiles
98-146706-A
Chapter 6: Configuration
6-31
Confi
guration
6.4.7
To send a diagnostics report
You can send automatically generated diagnostic reports at fixed intervals. The diagnostic
report contains information from the ADU and ACU that are relevant for the service
personnel during troubleshooting.
To set up sending a statistics report, do as follows:
1. Go to
SETTINGS > Reports
.
2. In the section
DIAGNOSTICS REPORT
enter the following:
• E-mail sender.
• E-mail recipients (comma separated).
• Send interval: Select disabled, day (default) with 2-minute samples, week with hourly
samples or month with hourly samples. The report contains statistics data for the
selected intervals.
3. Click
Apply.
You can generate and send the diagnostic report at any time by clicking
Send now
or at
monthly intervals, then click
Send monthly
, or go to the page
HELPDESK
and click
Download
to download it directly to your computer. See also
Figure 6-24: Statistics report (example)
SAILOR900Ka-IM-98-146706.book Page 31 Thursday, July 16, 2015 11:07 AM
