Alerts and notifications
98-137261-F
Chapter 3: Service & maintenance
29
that the alerts with the same importance are sorted primarily by time of last
change of state (see IEC62923-1 2018 section 6.4.2.1). To go to the top of the
list of Alerts (highest priority), tap
Top
.
To display notifications, tap the notification icon above the UTC time in the
bottom bar.
Alerts
Icons for alerts
The following table shows the icons for alerts with a description.
Note
The SAILOR 6390 Navtex Receiver does
not
report alerts of the type
Alarm (red icon).
Icon
Name
Icon description
Active -
unacknowledged
alarm
A flashing red triangle. A symbol of a
loudspeaker in the middle of the triangle. This
alert is accompanied by an audible alarm
signal (3 beeps).
This icon is displayed when there is an active
unacknowledged alarm.
Active – silenced
alarm
A flashing red triangle. A symbol of a
loudspeaker with a prominent diagonal line
through it.
This icon is displayed when there is an active
silenced alarm.
Active –
acknowledged
alarm
A red triangle. An exclamation mark in the
middle of the triangle.
This icon is displayed as long as the alarm
condition is present.
Active -
responsibility
transferred alarm
A red triangle. An arrow pointing towards the
right in the middle of the triangle.
This icon is displayed as long as the alarm
condition is present.
Summary of Contents for Sailor 6390 Navtex
Page 1: ...SAILOR 6390 Navtex Receiver User Manual ...
Page 2: ......
