COBHAM SAILOR 6120, Installation Manual

Page: 29 / 116

Chapter 2: Install the system
Install the SAILOR 3027 17
2222
Install th
e
syst
em
2.3.2 Mount the SAILOR 3027 mini-C terminal
The SAILOR 3027 has one CAN connector and is designed primarily for pole
mounting.
• For mechanical drawings, see Mechanical outline drawing, SAILOR
3027 on page 20.
• For information on wiring, see Connect the system on page 21.
• For part numbers of the mounting accessories, see Available parts on
page 91.
2.3.2.1 Pole mount 1”
The pole mount kit is included with your
SAILOR 3027. Follow the instructions
included with the pole mount kit.
1. Lead the cable through the pole and pole
mount adapter.
2. Connect the CAN cable to the terminal.
3. Mount cable relief for the CAN cable.
4. Mount the adapter on the terminal using screws.
5. Tighten the adapter to the pole.
Important
Do not tighten the screws more than
max. torque 2.5 Nm
when you mount the SAILOR 3027. Tightening the screws
too much may cause damage to the housing of the SAILOR
3027 and thus impair the protection against water intrusion.
If you are mounting the terminal directly on a plain surface,
use a large spacer (order no. 403027-921) between the
mounting surface and the SAILOR 3027 and tighten the
screws to torque
1.5 - 2.5 Nm
.
Note The connector is waterproof.
Do not attempt to seal the
connection any further.