COBHAM SAILOR 6000B, User Manual

Page: 36 / 82

Chapter 2: Operation
26 Messages
To use Cyrillic characters
To be able to type Cyrillic characters in your message, it must first be
enabled in the
SYSTEM SETTINGS
page.
To enable the use of Cyrillic characters in your message, first do as follows:
1. From the main menu, select
System > Settings.
2. Select
Cyrillic settings.
3. Select
Enabled
and then
OK
.
When Cyrillic characters are enabled, you can change your keyboard in the
telex call page or the message editor.
Note
On the SAILOR 6018 Message Terminal only an on-screen Cyrillic
keyboard is supported.