Keypad and menus of the ACU
6-36
Chapter 6: Configuration
98-148248-A
To clone a system configuration, do as follows:
1. Reset to factory default, see the following section for details.
2. Import a configuration from file, see section above.
To reset to factory default - ADU and ACU
6.6
Keypad and menus of the ACU
6.6.1
ACU display and keypad
In the ACU display you can see the current state of the system. You can also see events
(warnings, errors and information) and how the system has been configured. Use the
keypad to navigate through the menu tree.
1. Current status of the SAILOR 600 VSAT Ka:
Antenna initializing
Antenna SW upload
Antenna POST error
XIM data error
Unrecoverable XIM data error
System upgrade
Antenna POST pending
Antenna POST
Safe Mode
(error, followed by an error description)
Ready
(waiting for data from the modem or no satellite profile selected)
Pointing antenna
(locating the satellite)
Acquiring signal
(acquiring the satellite signal)
Tracking
(tracks the current satellite)
Lineup
(line up is activated)
Azimuth calibration
TX cable calibration
Figure 6-30: Display and keypad of the ACU (example)
6 7 8 9 Signal strength
0DLQ1$9*+0'01(72./$1±
75$&.,1*
6$7:5;/+7;0$5
1 2 3 4 5
SAILOR600Ka-IM-98-148248.book Page 36 Monday, November 23, 2015 1:36 PM
