Satellite profiles and VSAT modem profiles
98-148248-A
Chapter 6: Configuration
6-35
Confi
guration
To set up the user permissions for guest users, do as follows:
1. From the left navigation pane, select
ADMINISTRATION > User permissions
.
2. For each item under
ALLOW USERS TO:
select
•
Yes
to allow access
•
No
to block access to the settings. Then the pages are read-only, changes cannot be
made by non-administrator users.
3. Click
Apply
.
The settings to which access is denied are now greyed out for the guest user or there is a
message at the top of the page saying that the page requires administrator logon.
To import and export a system configuration
If you need to reuse a configuration in another SAILOR 600 VSAT Ka system, you can save
the current configuration to a file, which can then be loaded into another SAILOR 600 VSAT
Ka. You can also use this feature as backup. The configuration file contains all the settings
you have entered during system setup: satellite profiles, modem profiles, LAN setup,
blocking zones, etc.
To save a configuration to a file, do as follows:
1. Select
ADMINISTRATION > Export/import config
.
2. Click the button
Export
. Follow the download instructions on the screen. You can use
this configuration file for upload into another SAILOR 600 VSAT Ka,
To load a configuration from a file, do as follows:
1. Select
ADMINISTRATION > Export/import config
.
2. Click the button
Browse
and locate the configuration file (.cfg file) you want to upload
3. Click the button
Open
.
4. Click the button
Upload
.
Figure 6-29: Web interface: ADMINISTRATION, Export/import
configuration
Note
The antennas involved must have the same software version.
SAILOR600Ka-IM-98-148248.book Page 35 Monday, November 23, 2015 1:36 PM
