manualshive.com logo in svg

COBHAM GRMON3, User Manual, Page: 201 / 239

Share
Download
COBHAM GRMON3 User Manual Download Page 201

GRMON3-UM
June 2019, Version 3.1.0

201

www.cobham.com/gaisler

94. symbols - syntax

NAME

symbols - Load, print or lookup symbols

SYNOPSIS

symbols ?

options

? 

filename

 ?

cpu#

?

symbols 

subcommand

 ?

arg

?

DESCRIPTION

The symbols command is used to load symbols from an object file. It can also be used to print all loaded symbols
or to lookup the address of a specified symbol.

symbols ?

options

? 

filename

 ?

cpu#

?

Load the symbols from 

filename

. If cpu# argument is omitted, then the symbols will be associated with

the active CPU.

Options:

-debug

Read in DWARF debug information

symbols clear ?

cpu#

?

Remove all symbols associated with the active CPU or a specific CPU.

symbols list ?

options

? ?

cpu#

?

This command lists loaded symbols. If no options are given, then all local and global functions and objects
are listed. The optional argument cpu# can be used to limit the listing for a specific CPU.

Options:

-global

List global symbols

-local

List local symbols

-func

List functions

-object

List objects

-all

List all symbols

symbols lookup 

symbol

 ?

cpu#

?

Lookup the address of the specified symbol using the symbol table of the active CPU. If cpu# is specified,
then it will only look in the symbol table associated with that CPU.

symbols lookup 

address

 ?

cpu#

?

Lookup symbol for the specified address using the symbol table of the active CPU. If cpu# is specified,
then it will only look in the symbol table associated with that CPU. At most one symbol is looked up.

RETURN VALUE

Upon successful completion symbols list will return a list of all symbols and their attributes.

Nothing will be returned when loading or clearing.

Command symbols lookup will return the corresponding address or symbol.

EXAMPLE

Load the symbols in the file 

hello

.

grmon3> symbols hello

Summary of Contents for GRMON3
















































































































































































































































Reviews:

No comments