manualshive.com logo in svg

COBHAM explorer 727, User Manual, Page: 70 / 179

Share
Download
COBHAM explorer 727 User Manual Download Page 70

Chapter 4: To use the web interface

98-126882-F

To handle SMS messages

63

To receive a message

If a message has arrived, the icon bar at the top of the web interface shows an unopened 
envelope. Click the envelope to see the new message(s).

Otherwise, to see new messages click 

MESSAGES

 from the left navigation pane. 

The page shows new incoming messages.

If the message is not an SMS message but information of voice mail, call your Voice mail 
service number to hear the Voice mail. The Voice mail service number is normally listed in the 
SMS message.

You may also find the Voice mail service number under 

MESSAGES

 > 

Message settings

. 

Note that the voice mail number is only shown here if it is available on the SIM card. Otherwise, 
refer to the information included with your Airtime subscription.

Options for new SMS messages

To see new messages, click 

MESSAGES

 from the left navigation pane. 

Besides viewing the new messages, you have a number of options for what to do with each 
message:

•

Click 

Archive

 to move it to your Inbox containing read messages.

•

Click 

Reply

 to reply to a message. 

Then type in your reply and click 

Send

.

For information on how to include the original message in your reply, see 

To set up the 

default message options

 on page 64.

•

Click 

Forward

 to forward a message to someone. 

Then type in the phone number in the 

Recipient

 field and click 

Send

.

•

If you want to move all the new messages, click 

Move all new messages to Inbox

.

Options for SMS messages in the Inbox

The messages in the Inbox are the incoming messages that have been read and moved from 
the list of new messages (refer to the previous section).

From the Inbox, you have the following options:

•

Click 

Reply

 to reply to a message. 

Then type in your reply and click 

Send

.

Note

There are two Voice numbers, one for 3.1 kHz Audio and one for Standard Voice.

Note

The terminal does not accept more than 100 incoming messages (including read and 
unread messages). If you have received 100 messages, you must delete some of them 
in order to free space for new messages. Otherwise, the new messages are rejected.

Note

New messages cannot be deleted until they have been moved to the Inbox.

Summary of Contents for explorer 727




















































































































































































Reviews:

No comments