Chapter 4: To use the web interface
98-140012-H
Advanced settings
102
Prepare the terminal for remote access with SMS
1. From the
Remote management
page, locate the section
Remote access with SMS
.
2. Select whether you want to
Enable remote SMS commands
.
3. Enter the password for remote SMS. It can be 5 to 15 characters long. The characters 0-9,
a-z and A-Z are allowed.
The password is mandatory
. This password must be entered
every time you send an SMS command. Default password is
remote
.
See
Remote access with SMS on page 37
4. Select
Trust all phone numbers
or, at
Trusted phone numbers
, enter at least one
trusted mobile number from which the terminal accepts an SMS. Use the wild card * to
accept a range of trusted numbers.
5. To add more phone numbers, click
Add phone number
again.
6. Click
Save
.
For information on how to send SMS commands, see
Remote access with SMS on page 37
.
Note
The terminal must be logged on to the BGAN satellite services to receive and accept
an SMS.
Entered mobile number with wild card
Mobile numbers accepted
+453955880*
+4539558800 to +4539558809
+45395588*
+4539558800 to +4539558899
Important
If you select
Trust all phone numbers
you should take security measures
such as changing the SMS remote password in order to avoid unintended
use.
