EXPLORER 325
Quick Guide
Access the Internet
To access the Internet do as follows:
1. Connect the LAN cable between your
computer and the EXPLORER 325.
2. Start up your computer.
3. Open your browser.
If your data connection is automatically enabled,
you should now have access to the Internet. If
not, you must start a connection as described in
the next section.
Start/stop data sessions on LAN.
You can start and stop data sessions with a
connected IP Handset (master handset, local
no. 0501) or with the terminal’s built-in web
interface.
NOTE:
When running a Streaming session you
are charged for the time you are connected. A
started Streaming session will stay active until
you stop it.
IP handset
: To start or stop data sessions with
the IP handset, do as follows:
1. From the BGAN menu, select
Connect
.
2.
Use the left/right keys to find the network user
group for the application you want to start or
stop.
3. Use the up/down keys to select the
connection you wish to start (Active) or stop
(Inactive).
4. Select
Start
to start a connection or select
Stop
to stop a connection.
Web interface
: Using a connected computer
you can also start or stop data sessions from
the Dashboard of the terminal’s built-in web
interface.
To access the web interface, open your browser
and enter the IP address of your EXPLORER 325.
The default IP address is
192.168.0.1
.
To start
data sessions from the Dashboard, click
the
Start Standard
link under
PROFILES ON
LAN
.
For further information, refer to the
EXPLORER 325 User manual.
