Chapter 5: Configuration with web interface
98-169085-B
Advanced settings
89
4. To add more phone numbers, click
Add phone number
again.
5. Click
Save
.
For information on how to send SMS commands, see
Remote control of tracking
When you are using the tracking function of the EXPLORER 323, you can set up the terminal so
that the tracking server can access the EXPLORER 323 e.g. to start or stop tracking or to change
reporting intervals.
To allow the tracking server to control the tracking settings, do as follows:
1. Under
Advanced
, select
Tracking settings.
2. Select
Allow remote control of tracking
.
3. Click
Save
.
The EXPLORER terminal will now accept commands from the specified tracking server, for
example to change reporting intervals or start/stop reporting.
