Chapter 5: Configuration with web interface
98-169085-B
Multiple data connections
55
The new connection package is now on the startup page (Dashboard).
When you have started this connection package and traffic is detected on the LAN or WLAN
interface, the filters are used to route the traffic. E.g. if you connect your video equipment with
UDP traffic to the EXPLORER 323, your video transmission will use the connection that has
UDP in the filter settings (64 Streaming in the example above).
Automatic Context Activation (ACA)
To enable Automatic Context Activation of your Standard data connection, do as follows:
1. From the Dashboard, click
gearsalt
in the right side of the tile with the connection package that
you want to change.
2. Select
Parameters
.
3. Select
Automatic Context Activation (ACA) of Standard data
.
• When you
select
ACA, the data connection is automatically established after restart as
soon as the EXPLORER 323 and its BGAN connection are ready.
• When you
disable
ACA, you can control the data connection manually from the startup
page
speed
or with the SMS command ACTIVATE.
Note
You are charged for the data transferred. You may want to disable automatic
updates in your LAN device to avoid unnecessary charges.
