manualshive.com logo in svg

COBHAM 2201R, Reference Manual, Page: 294 / 295

Share
Download
COBHAM 2201R Reference Manual Download Page 294

2201R Mobile Tester  SCPI Reference Guide

Chapter 11 Fetch commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

294

:FETCh:EGPRs:RFTX:PPEAk?

Syntax

:FETCh:EGPRs:RFTX:PPEAk?

Parameters

There are no parameters.

Description

There is solely a query form of this command available.

Query

The query form of this command returns the latest measurement result value(s) of the 
MEAS:EGPRs[:ARRay]:RFTX:PPEAk measurement. The string delivered back contains at least one floating point real 
number with the physical dimension of degrees.

Example

:MEAS:EGPRs:RFTX:PPEAk
:FETCh:EGPRs:RFTX:PPEAk?
The value returned is: "5.13".

:FETCh:EGPRs:RFTX:PRMS?

Syntax

:FETCh:EGPRs:RFTX:PRMS?

Parameters

There are no parameters.

Description

There is solely a query form of this command available.

Query

The query form of this command returns the latest measurement result value(s) of the 
MEAS:EGPRs[:ARRay]:RFTX:PRMS measurement. The string delivered back contains at least one floating point real 
number with the physical dimension of degrees.

Example

:MEAS:EGPRs:ARR:RFTX:PRMS 5
:FETCh:EGPRs:RFTX:PRMS?
The values returned are: "2.49,2.37,2.51,2.47,2.35".

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments