manualshive.com logo in svg

COBHAM 2201R, Reference Manual, Page: 286 / 295

Share
Download
COBHAM 2201R Reference Manual Download Page 286

2201R Mobile Tester  SCPI Reference Guide

Chapter 11 Fetch commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

286

:FETCh:GPRS:MULTIslot:RFTX:PPEAk?

Syntax

:FETCh:GPRS:MULTIslot:RFTX:PPEAk?

Parameters

There are no parameters with this command.

Description

Only the query form of this command is available.

Query

Returns a string containing int1 times the result string from the :MEASure:GPRS:CONT:MULT:RFTX:PPEAk query. int1 
is specified with the preceding :MEAS:GPRS:ARR:MULT:RFTX:PPEAk command.

Example

:CONF:GPRS:MSTA:MSL 2
:MEAS:GPRS:ARR:MULT:RFTX:PPEAk 3
:FETCh:GPRS:MULT:RFTX:PPEAk?
Returns a string containing nine results separated by commas, for example
2,8.3,9.6, 2,8.1,8.9, 2,8.2,9.5

:FETCh:GPRS:MULTIslot:RFTX:TEMPlate?

Syntax

:FETCh:GPRS:MULTIslot:RFTX:TEMPlate?

Parameters

There are no parameters with this command.

Description

Only the query form of this command is available.

Query

The return string contains int1 times the number of the uplink time slots followed by the pass/fail results for the 
individual slots, one result for each slot. A 0 indicates that the burst shape is inside limits, 1 indicates outside limits 
for the respective part. int1 is specified with the preceding :MEAS:GPRS:ARR:MULT:RFTX:TEMP command.

Example

:CONF:GPRS:MSTA:MSL 2
:MEAS:GPRS:ARR:MULT:RFTX:TEMP 3
:FETCh:GPRS:MULT:RFTX:TEMP?
Returns a string like the following:
2,0,0, 2,0,1, 2,0,1
In this example, the signal hits the limits in the second slot for the second and third measurement.

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments