manualshive.com logo in svg

COBHAM 2201R, Reference Manual, Page: 285 / 295

Share
Download
COBHAM 2201R Reference Manual Download Page 285

2201R Mobile Tester  SCPI Reference Guide

Chapter 11 Fetch commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

285

:FETCh:GPRS:RFRX:RTDelay?

Syntax

:FETCh:GPRS:RFRX:RTDelay?

Parameters

There are no parameters.

Description

There is solely a query form of this command available.

Query

The query form of this command returns the latest measurement result value(s) of the 
:MEAS:GPRS[:ARRay]:RFRX:RTDelay measurement. The string delivered back contains at least one integer.

Example

:MEAS:GPRS:RFRX:RTD
:FETCh:GPRS:RFRX:RTD?
The string delivered back is:
"8".

:FETCh:GPRS:MULTislot:RFTX:ALL?

Syntax

:FETCh:GPRS:MULTislot:RFTX:ALL?

Parameters

There are no parameters with this command.

Description

Only the query form of this command is available.

Query

Requires a preceding :MEAS:GPRS:ARR:MULT:RFTX:ALL <int1> command. Returns a string containing int1 times the 
result string defined for the :FETCh:GPRS:MULT:RFTX:ALL query.

Example

:CONF:GPRS:MSTA:MSL 2
:MEAS:GPRS:ARR:MULT:RFTX:ALL 10
:FETCh:GPRS:MULT:RFTX:ALL?
Delivers a string containing 10*(1+2*19)=390 results, separated by commas.

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments