manualshive.com logo in svg

COBHAM 2201R, Reference Manual, Page: 119 / 295

Share
Download
COBHAM 2201R Reference Manual Download Page 119

2201R Mobile Tester  SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

119

:CONFigure:GPRS:BS:CI 

Syntax

:CONFigure:GPRS:BS:CI <int1>

Parameters

int1 is an integer.
The minimum value for int1 is 0, the maximum value is 65535. The default value for int1 is 255.

Description

This command sets the cell identity parameter (i.e. the radio cell number), broadcast in the system information 
message.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:BS:CI 127
:CONF:GPRS:BS:CI?
Value returned: "127".

:CONFigure:GPRS:BS:LAI:MCC 

Syntax

:CONFigure:GPRS:BS:LAI:MCC <int1>

Parameters

int1 is an integer.
The minimum value for int1 is 0, the maximum value is 1000. The default value for int1 is 1.

Description

This command sets the mobile country code.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:BS:LAI:MCC 238
:CONF:GPRS:BS:LAI:MCC?
Value returned: "238".

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments