manualshive.com logo in svg

COBHAM 2201R, Reference Manual, Page: 115 / 295

Share
Download
COBHAM 2201R Reference Manual Download Page 115

2201R Mobile Tester  SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

115

:CONFigure:GPRS:BS:RLCMac:TFI 

Syntax

:CONFigure:GPRS:BS:RLCMac:TFI <int1>

Parameters

int1 is an integer.
The minimum value for int1 is 0, the maximum value is 31. The default value for int1 is 0.

Description

This command sets the temporary flow identifier (TFI) in (asynchronous) generator/analyzer mode (please refer to 
the description of the :CONF:CSYS:GPG command for further information).

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:BS:RLCMac:TFI 15
:CONF:GPRS:BS:RLCM:TFI?
Value returned: "15"

:CONFigure:GPRS:BS:RLCMac:BSN[:DATA] 

Syntax

:CONFigure:GPRS:BS:RLCMac:BSN[:DATA] <int1>

Parameters

int1 is an integer.
The minimum value for int1 is 0, the maximum value is 127. The default value for int1 is 0.

Description

This command sets the block sequence number (BSN) in (asynchronous) generator/analyzer mode (please refer to 
the description of the :CONF:CSYS:GPG command for further information).
The BSN is the absolute block sequence number modulo 128 of each RLC data block within the TBF. It is used to 
enumerate the RLC data blocks, starting with 1.

Query

The query form of this command returns the current setting. The string delivered back contains one integer.

Example

:CONFigure:GPRS:BS:RLCMac:BSN:DATA 1
:CONF:GPRS:BS:RLCM:BSN?
Value returned: "1"

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments