manualshive.com logo in svg

COBHAM 2201R, Reference Manual, Page: 113 / 295

Share
Download
COBHAM 2201R Reference Manual Download Page 113

2201R Mobile Tester  SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

113

:CONFigure:GPRS:BS:RLCMac:USF:INC 

Syntax

:CONFigure:GPRS:BS:RLCMac:USF:INC <PredefExp>

Parameters

PredefExp is one of the following predefined expressions: ON|OFF.
Default is ON.

Description

Switches the auto-incrementing of the USF either on or off.
For further details regarding the USF, please refer to the description of the :CONFigure:GPRS:BS:RLCMac:USF 
command above.

Query

The query form of this command returns the current setting. The string delivered back contains one of the predefined 
expressions explained above.

Example

:CONFigure:GPRS:BS:RLCMac:USF:INC OFF
:CONF:GPRS:BS:RLCM:USF:INC?
Value returned: "OFF".

:CONFigure:GPRS:BS:RLCMac:RRBP[:DATA] 

Syntax

:CONFigure:GPRS:BS:RLCMac:RRBP[:DATA] <PredefExp1>

Parameters

PredefExp1 is one of the following predefined expressions: N13|N17|N21|26.
Default is N13.

Description

This command sets the relative reserved block period (RRBP) in (asynchronous) generator/analyzer mode (please 
refer to the description of the :CONF:CSYS:GPG command for further information).
The RRBP marks the block to which the USF parameter corresponds, in relation to the block currently used.

Query

The query form of this command returns the current setting. The string delivered back contains one of the predefined 
expressions explained above.

Example

:CONFigure:GPRS:BS:RLCMac:RRBP:DATA N21
:CONF:GPRS:BS:RLCM:RRBP?
Value returned: "N21"

Summary of Contents for 2201R








































































































































































































































































































Reviews:

No comments