COBHAM 2201R Reference Manual Download Page 110

Page: 110 / 295

2201R Mobile Tester SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

110

:CONFigure:USSD:FNUM

Syntax

:CONFigure:USSD:FNUM

Parameters

No parameters.

Description

This command returns the value of Function Number string received from the DUT.

Query

The query form of this command returns the current value of the Function Number string.

Example

Registration: **214*SI***#

De-registration: ##214*SI***#

SI = supplementary information, contains the international functional ID.

:CONFigure:USSD:FNUM?

Value returned: "**214*04921234501***#"

:CONFigure:GSMR:VGCS:UTOUinfo?

Syntax

:CONFigure:GSMR:VGCS:UTOUinfo?

Parameters

There are no parameters.

Description

There is solely a query form of this command available.

Query

The query form of this command returns the current setting of U2U Info. The string delivered back contains any of
the following:

0 – 2201R did not receive VGCS U2U info

1 – 2201R received VGCS U2U info

2 – Timer expired on 2201R while waiting to receive VGCS U2U info.

Example

:CONFigure:GSMR:VGCS:UTOUinfo?
The value returned is: "0".

Summary of Contents for 2201R








































































































































































































































































































Search results

Summary of Contents for 2201R

Reviews:

COBHAM 2201R, Reference Manual, Page: 110 / 295

Search results

Summary of Contents for 2201R

Reviews: