21
SMS command:
stop+password
Tracker response:
Stop engine succeed
Example:
stop123456
Once the immobilize function has been executed, it will remain immobile until you send
command to resume the fuel supply
Remote fuel resume
SMS command:
password
Tracker response:
Resume engine Succeed
This means tracker will now resume the fuel & power supply.
6.13
Configure times of alarm SMS
The times of the message of a continuous alarm can be configured. 3 times messages by
default.
SMS command:
xtime+ptimes value
Tracker response:
xtime ok!
Example:
xtime123456 005
(It means to send messages 5 times.)
Note: The times value must be 3 digits.
6.14
Alarms
6.14.1
Low battery alarm
This feature is activated by default, when the battery is low, tracker will send message “low
b latitude & longitude” to authorized numbers for 2 times at 15 minutes interval.
Note: The times of this alert cannot be configured by the xtime command.
SMS command to deactivate:
lowpspace+off
Tracker response:
lowbattery off ok
Example:
lowbattery123456 off
SMS command to activate:
lowpspace+on
Tracker response:
lowbattery on ok
Example:
lowbattery123456 on
6.14.2
Power disconnection alarm
This feature activate by default. Tracker will send “Power alarm+latitude & longitude” to
authorized numbers every 3 minutes when external power disconnected
