60
Resetting the Qube 2 Administrator password
When the Qube 2 Administrator password is cleared, the root account is
not accessible until a new administrator password is assigned.
!
Caution:
After you clear the password, enter a new one as
soon as possible to protect the security of the Qube 2. At this
point, anyone on the network can assign the Qube 2
Administrator password until you assign a new one.
If you forget the password for the Qube 2 Administrator, you can reset
the password:
1.
Push and hold a paper clip in the recessed Reset Password button
(on the back of the Qube 2; see Figure 2). Hold the button in for
approximately 2 seconds.
The LCD screen displays
RESETTING ADMIN
PASSWORD
2.
In your Web browser, enter the URL
http://<IP address>/admin/ to access the
Administrator Site
screen.
3.
If a prompt appears asking for a user name or password, enter
“admin” as the user name and leave the password blank. Click
OK
.
4.
Click
Users
on the left.
5.
Click
Administrator
at the top. The Administrator Settings table
appears.
6.
Enter the new password twice to ensure that you have entered it as
intended. For guidelines on choosing a password, see “Password
guidelines” on page 24.
7.
Click
Save Changes
.
Summary of Contents for Cobalt Qube 2
