Cobalt Digital Inc BBG-1034-AUD-PRO-DSP, Product Manual, Page: 66 / 118

3
BBG-1034-AUD-PRO-DSP Function Menu List and Descriptions
3-34
BBG-1034-AUD-PRO-DSP PRODUCT MANUAL BBG-1034-AUDPRO-OM (V1.6)
Input Audio Routing/Controls
Provides audio routing, gain, per-channel/bulk audio
delay controls, and audio meters. These controls route
selected audio sources onto the device 16-channel
internal bus (which is used for all audio processing).
Table 3-1 BBG-1034-AUD-PRO-DSP Function Menu List — continued
All audio inputs are transferred through the
device via the 16-channel Internal Bus (Bus Ch
1 thru Bus Ch 16).
The example here shows various Source
selections that direct Emb Ch 1 thru Ch 6 and
AES Ch 1 and Ch 2 onto the device internal bus
(unused bus channels can be set to Silence or
Mute).
Each bus channel provides Gain, Mute, and
Invert controls.
The source-to-destination correlation shown
here is only an example; any of the sources
described on the following pages can route to
any of the internal bus channels.
Bus Ch 1
Bus Ch 2
Bus Ch 3
Bus Ch 4
Bus Ch 5
Bus Ch 6
Bus Ch 7
Bus Ch 8
Bus Ch 9
Bus Ch 10
•
•
•
Bus Ch 16
Silence
or Mute
AES Ch 1-2
Emb Ch 1 – 6
Input Audio
Crosspoint
16-Ch Internal Bus
(Gain, Mute, Bulk and
Channel Delay Controls)