3
BBG-1002-UDX Function Menu List and Descriptions
3-48
BBG-1002-UDX PRODUCT MANUAL
BBG1002UDX-OM (V1.5)
Reticules
Allows Safe Action and/or Safe Title overlays and other
static markers to be added to the output video image.
Note: • Overlay markers using this function are for setup only. When enabled, these markers are embedded in the output
video and will appear in the image. Use this function only on preview video and not on-air video. Make certain any
overlay tools are turned off when no longer needed.
• Multiple overlay markers described below can be simultaneously enabled as desired.
• Insertion Master Enable/Disable
Provides independent master enable/disable for SDI and CVBS outputs.
• When enabled, any combination of reticules or other markers described
below can be inserted.
• When disabled, insertion of all reticules or other markers is disabled.
• Safe Action Area (SAA) Controls
• SAA provides enable/disable of safe action area graticule insertion.
• SAA Height and SAA Width control height and width of insertion (from
0% to 100% of 4:3 outputted image area).
Note: Reticule Size control is locked to Custom for this device, with safe
action area size control as described above.
Table 3-2
BBG-1002-UDX-UDX Function Menu List — continued
Typical Reticule/Overlay Marker Insertions
Any combination of the reticule/overlay markers can be applied to the output video. Sizing and other characteristics for each type
of marker can be set as described below.
Safe Action Area (SAA) Reticule
Safe Title Area (STA) Reticule
Graticule
Center Cross
