3
BBG-1002-UDX Function Menu List and Descriptions
3-26
BBG-1002-UDX PRODUCT MANUAL
BBG1002UDX-OM (V1.5)
(Option +QC only) Sets quality check screening and
thresholds for video quality event alerts. When a quality
events occur, the event(s) can be used by the Presets
function to invoke input routing or other changes.
Note:
Input B has controls identical to the controls described here for Input A sub-tab. Therefore, only the Input A controls
are shown here. Set controls for other inputs using the respective sub-tab.
• Event Status Indicator
Displays event status (based on criteria set below) for signal condition to
be considered OK (green), or signal condition considered to be a quality
alert event (red) due the condition exceeding the criteria threshold(s) set
below.
Video Quality Events
• Position and Width Controls
Position and Width controls set the area of concern to be screened by the
Quality Event function.
X and Y Position controls set the origin point for the area of concern
X and Y Width controls set the size for the area of concern
• Threshold and Event Type Controls
Sets the thresholds for black frame and event type to be considered.
Also provides holdoff controls for event trigger engagement and
disengagement.
• Noise Immunity sets the relative noise levels that are rejected in
the course of black event assessment (Low, Medium, or High).
• Engagement Holdoff sets the time (in min/msec) where, when time
is exceeded, an event is to be considered a valid alert event.
• Disengagement Holdoff sets the time (in min/msec) where, when
event time is has ceased, an alert event is cleared.
• Event Type sets the type of event(s) to be considered by the event
screening (Disabled, Frozen frame, Black frame, or either Black or
Frozen frame).
Table 3-2
BBG-1002-UDX-UDX Function Menu List — continued
Origin (0,0)
x= 100%
y= 100%
x and y @ 20%
x and y @ 80%
