3
BBG-1002-UDX Function Menu List and Descriptions
3-12
BBG-1002-UDX PRODUCT MANUAL
BBG1002UDX-OM (V1.5)
Output Video Mode Controls
Allows selection of each of the four video output coaxial
connectors as processed SDI out or reclocked SDI out.
Also provides CVBS parameter controls and test
pattern output controls for device CVBS output.
• Output Video Crosspoint
For each SDI output port supported by the device, provides a crosspoint
for routing program processed video or selected-input reclocked to an
SDI output.
In this example, SDI OUT 1 and SDI OUT 3 are receiving Program
(procesed) video out, with SDI OUT 2 providing SDI IN A reclocked input
video.
Note: • Choices shown here are examples only. Key preview available
only when equipped with +KEYER option.
• Outputs set to Input Reclocked will pass input SDI regardless
of Input SDI Raster Size / Frame Rate Filtering. Input filtering
applies only to the device program video path.
Provides CVBS output parameter controls and test
pattern output controls
• CVBS Oversampling and Color Controls
• Oversampling enables or disables video DAC oversampling.
Oversampling can improve rendering of motion for down-conversions to
the CVBS SD analog output.
• Color enables or disables chroma content in the CVBS output.
• CVBS Test Pattern Generator Control
Enables manual insertion (replacement) of CVBS output video to instead
output 75% color bars.
Table 3-2
BBG-1002-UDX-UDX Function Menu List — continued
