BBG1002UDX-OM (V1.5)
BBG-1002-UDX PRODUCT MANUAL
3-13
Setup/Operating Instructions
BBG-1002-UDX Function Menu List and Descriptions
Provides up/down/cross-converter, aspect ratio
controls, and user H/V controls.
Scaler
• Scaler Enable Control
Enables or disables Scaler function.
Note: When scaler is disabled, all ancillary data is passed from input to
output intact. If the scaler is enabled, ancillary data such as
timecode and closed captioning must be set for re-insertion as
desired. See Timecode (p. 3-42) and Closed Captioning (p. 3-47)
for more information about insertion into scaled output video.
• De-Interlacer Control
Allows de-interlacer to be bypassed to reduce processing latency.
• Bypassed: De-interlacer is bypassed regardless of conversion
being performed. When converting from interlaced to progressive,
this results in reduced latency at the expense of fast-motion
smoothness.
• Auto-Enable: Applies de-interlacing for interlaced-to-interlaced
conversions where useful (such as 1080i to 525i conversions). This
is the default normal mode which also disables de-interlacing where
not required (e.g., conversions within progressive formats).
• Always Enabled For Interlaced Input: This setting enables
de-interlacing always when an interlaced input format is being
converted by the scaler.
Note: De-interlacer is always bypassed when converting from a
progressive format to a progressive format.
• Input/Output Video Status
Displays signal format/status sent to scaler and output format/status.
If invalid or no signal is present, none is displayed.
• Output Format Selector
Provides conversions to formats as shown.
Note: Output Format selections shown here are base scaler without
FRC (all conversion choices stay within input native frame
rate).
With FRC, frame-rate specific choices are also available.
See Frame Rate Conversion (FRC) Controls below for
device equipped with FRC.
Table 3-2
BBG-1002-UDX-UDX Function Menu List — continued
