Cobalt Digital Inc 9922-FS, Product Manual, Page: 34 / 118

2
Installing a Rear I/O Module
2-4
9922-FS PRODUCT MANUAL 9922FS-OM (V1.5)
9922-FS Rear I/O Modules
Table 2-1 shows and describes the full assortment of Rear I/O Modules
specifically for use with the 9922-FS.
Notes: Rear I/O Modules equipped with 3-wire Phoenix connectors are supplied with
removable screw terminal block adapters. For clarity, the adapters are omit-
ted in the drawings below.
Table 2-1 9922-FS Rear I/O Modules
9922-FS Rear I/O Module Description
RM20-9922-FS-A/S Split Rear Module. Provides each of the following
connections for two 9922-FS cards:
• Two 3G/HD/SD-SDI coaxial input BNCs (SDI IN A
and SDI IN C)
• Three 3G/HD/SD-SDI Video Out BNCs (SDI OUT 1
thru SDI OUT 3)
1937S
RM20-9922-FS-B Provides the following connections:
• One 3G/HD/SD-SDI coaxial input BNC (SDI IN A)
• One analog video CVBS coaxial input BNC
(CVBS IN)
• Two analog balanced audio inputs (AN-AUD IN 1
and AN-AUD IN 2)
• One AES input BNC (AES IN)
• One processed coaxial output BNC (SDI OUT)
• One analog video CVBS coaxial output BNC
(CVBS OUT)
• Two analog balanced audio outputs
(AN-AUD OUT 1 and AN-AUD OUT 2)
• One AES output BNC (AES OUT)
1913