9922FS-OM (V1.5)
9922-FS PRODUCT MANUAL
1-13
Introduction
9922-FS Functional Description
Character/Image Burn-in Functions
User text and timecode (as selected using the timecode function) can be
burned into the output video. Burn-in attributes such as size, position,
background, color, and opacity are user-configurable. Two discrete character
burn strings can be inserted on output video, with each string inserted as static
text and/or insert only upon LOS. A moving-box insertion can be enabled to
serve as a dynamic raster confidence check even in cases where the input
video image is static or lost.
Options
+T-SLATE
and
+LOGO
respectively provide for
automated trouble slate and logo (such as ID “bug”) into the output video
raster. this function enables a second independent video/framesync path in
which the input and output crosspoints supply two video paths to and from the
dual processing paths. Refer to +LOGO / +T-SLATE Manual Supplement
OPT-SW-PHXLTS-MS for detailed information and installation/setup
instructions. This supplement is furnished with either of these options.
Video Quality Events Detect Function
Option
+QC
provides a
Video Quality Events
user interface and an
Event
Triggers
user interface for setting an area of concern across the program raster
which can be monitored for frozen or black video events. Threshold controls
allow setting the sensitivity of the function, while engage and disengage
threshold timing controls allow setting how fast the event detection engages
and releases when triggered. The
Event Triggers
user interface allows
instructing the card as to the action to take upon an event (such as go to a
changed signal routing, activate a GPO, send an automated email, or go to a
user-defined preset).
An
Event Triggers
user interface can detect Closed Caption Presence and
Closed Caption Absence events. The
Event Triggers
user interface in turn
allows instructing the card as to the action to take upon an event (such as go to
a changed signal routing, activate a GPO, send an automated email, or go to a
user-defined preset).
Ancillary Data Processor
This function provides full VANC/HANC ancillary data de-embedding and
embedding for 3G/HD/SD-SDI streams. Direct access to DID and SDID
locations allows extraction or insertion of user data such as camera PTZ,
SCTE 104, closed-captioning read/insert, GPI/GPO via ANC, or other
specialized user payloads. Data can be extracted and inserted within the card
(Bridge mode), or inserted and/or extracted to and from the card via serial or
IP interfaces connecting to external devices/systems. A rear I/O module with
a dedicated IP port can be used with the ancillary data processor function for
data insertion or extraction via IP.
This option also provides SMPTE 337 embed/de-embed, which allows serial
user data to be embedded and de-embedded over unused embedded audio
pairs.
Summary of Contents for 9922-FS
Page 117: ......