9902-UDX-FS-OM (V1.1)
9902-UDX-FS PRODUCT MANUAL
3-47
Operating Instructions
9902-UDX-FS Function Menu List and Descriptions
Allows assignment of AFD codes to the SDI output
video, and allows custom ARC settings to be applied
for each code.
Provides active ARC re-aspecting, resulting in a
properly scaled and cropped image area.
AFD Processor Controls
Note:
•
AFD tab has identical independent controls for both Path 1 and Path 2 using the Path 1 / Path 2 sub-tabs. Therefore,
only the Path 1 controls are shown here. Set controls for other path using the respective sub-tab. (Path 2 AFD
controls only mark or change AFD coding; no re-aspecting can be performed on Path 2 since it is not equipped with
scaling.)
•
Although sub-tabs may show WSS and VI formats, currently functionality is limited to AFD only.
Table 3-2
9902-UDX-FS Function Menu List — continued
NTSC-Coded (4:3)
up-converted
1080i Video Signal
Re-Aspect to
16:9
1080i Video Signal
with 16:9
uncorrected ARC
Without AFD
NTSC-Coded
image on 16:9
display shows
letterbox cropping
Uncompensated
up-conversion
results in “postage
stamp” effect with
both letterbox and
sidebars visible on
16:9 display
NTSC-Coded (4:3)
1080i Video Signal
with 1010 AFD
Code
Re-Aspect to
16:9
1080i Video Signal
with 16:9
corrected ARC
With AFD
NTSC-Coded
image on 16:9
display shows
letterbox cropping
AFD Corrected
up-conversion/
re-aspect results in
intended image area
properly visible on
16:9 display
1010 AFD Code
Received and
Applied to
Scaler
