manualshive.com logo in svg

Cobalt Digital Inc 9902-DC-4K, Product Manual

Share
Download
Cobalt Digital Inc 9902-DC-4K Product Manual Download Page 23

9902DC4K-OM (V1.5)

9902-DC-4K PRODUCT MANUAL

2-5

Installation

Setting Up 9902-DC-4K Network Remote Control

Setting Up 9902-DC-4K Network Remote Control

Perform remote control setup in accordance with Cobalt

®

 reference guide 

“Remote Control User Guide” (PN 9000RCS-RM).

Note:

• If network remote control is to be used for the frame and the frame has not 

yet been set up for remote control, Cobalt

®

 reference guide Remote 

Control User Guide (PN 9000RCS-RM) provides thorough information and 
step-by-step instructions for setting up network remote control of Cobalt

®

 

cards using DashBoard™. (Cobalt

®

 OGCP-9000 and/or OGCP-9000/CC 

Remote Control Panels are not recommended for use with this product.)

Download a copy of this guide by clicking on the

Support > Reference Documents link at www.cobaltdigital.com and then 
select DashBoard Remote Control Setup Guide as a download, or contact 
Cobalt

®

 as listed in Contact Cobalt Digital Inc. (p. 1-14).

• If installing a card in a frame already equipped for, and connected to

DashBoard™, no network setup is required for the card. The card will be dis-
covered by DashBoard™ and be ready for use.

Summary of Contents for 9902-DC-4K































































Reviews:

No comments

Brands by name

Popular brands

Load more brands