19
4.2.5 ADJUST VOLUMES OF AUXILIARY AUDIO CHANNELS
Pressing PLAY will allow modification of this option. Pressing
another key will skip to the next option.
It is advisable that all headphone channels have approximately the same apparant volume level. This option
allows the volume levels of the audio inputs (AUDIO-IN and MICROPHONES) to be adjusted so they have
approximately the same volume
as the recorded commentary and ZONE’s
when selecting between different
headphone channels.
This option also allows adjustment to the sensitivity of the VOX override circuits (if enabled in
the “
or Disable Microphone VOX Overrides
” option
) The VOX circuit when activated by a voice on the microphone,
overrides all headphone channels to become the respective microphone channel. This sensitivity should be
adjusted so that a person talking with a normal voice into the microphone will trip the circuit, but other noises
such as wind and road noise do not. The effective trip-point for each VOX is set by trial and error.
The options are:
•
MIC A:
Adjustment will be made to the MIC-A input channel
•
MIC B:
Adjustment will be made to the MIC-B input channel
•
VOX A:
Adjustment will be made to the VOX sensitivity for MIC-A
•
VOX B:
Adjustment will be made to the VOX sensitivity for MIC-B
•
0:
Adjustment will be made to the CH-0 input channel
•
1:
Adjustment will be made to the CH-1 input channel
•
2:
Adjustment will be made to the CH-2 input channel
To modify this option:
Use the ROUTE keys change the selected channel to adjust the
volume (gain) for. Press SEGMENT UP to increases volume for
the channel. Press SEGMENT DOWN to decrease volume. PLAY
returns the system to normal operation.
4.2.6 SET THE AUDIO OUT CHANNEL
Pressing PLAY will allow modification of this option. Pressing
another key will skip to the next option.
This option selects the audio channel that appears at the AUDIO-OUT connector. The audio channel numbering
displayed here refers to the same channel numbering on the audio controllers.
The options:
•
Any channel that can be heard over the headphones can also be output to this connector.
To modify this option:
Pressing SEGMENT UP changes the channel that appears at the
AUDIO-OUT connector. PLAY accepts the new setting.
The setting has been saved; press any key to return to normal
operation.
CHANNEL: MIC A
CHANNEL VOLUME
AUDIO CHANNEL:2
SEGMENT UP, PLAY
OPTIONS UPDATED.
PRESS ANY KEY...
ADJUST VOLUMES?
PLAY=Y, OTHERS=N
SET AUDIO OUT?
PLAY=Y, OTHERS=N
