TourMaster-Lite User Manual v 4.0
5
1.7
AUDIO CONNECTION
This RCA connection provides a line-level audio output (1 x stereo or 2 x mono outputs) for connection to an
external amplifier or PA.
SPECIFICATIONS:
•
Connectors:
RCA Stereo
•
Audio Level:
0-1V RMS (Line level)
•
Output impedance:
100 Ohms
2.
BEFORE YOU START
To get started with your TourMaster-Lite system, you can create your GPS driven tour routes with pre-
recorded audio commentary and music for your passenger journeys. The methods to complete this is covered
in this section.
2.1
ROUTEBUILDER
The Route Builder software tool is used to set GPS waypoints and store pre-recorded tour commentary and
journey information. This can include storage of commentary audio files and music.
Refer to the Routebuilder Guide for step by step instructions for system set up to create/update routes,
segments and for adding audio files.
Note: Changes to route information can be easily updated on the original PC that the route was created on.
Section 3 of this manual covers manually setting GPS waypoints.
2.2
SYSTEM FOLDERS, FILES AND FORMATS (COMMENTARY/MUSIC)
“$COM”
FOLDER
This folder holds all route/tour information including GPS information and audio files. Its contents are created
using the “Route Builder” software tool. The windows installer for the tool can be found in the “
\
TOOLS” folder
on the system.
Note: Do not manually modify any contents of this folder. Any changes or modifications to your route(s)
must be done
via the “Route Builder”
software tool and exported to the system to maintain synchronization
with your master Route Builder database.
