O P E R A T I N G M A N U A L
8 0 0 . 7 4 9 . 2 7 6 1
w w w . c o a c h c o m m . c o m
6 5
Mast Assembly Steps
The following steps are also outlined (and illustrated) in the Game Day Setup section on page 11 of this manual.
CAUTION:
The following steps should be performed by at least two people.
1. Remove the mast from its storage area and insert it into the locked and upright mast receiving tube.
2. Align the mast so your RT mounting bracket(s) (when attached) will be
parallel to the sideline
and secure the
mast with pin 1 at the bottom of the tube.
3. Secure the mast and tube with one hand, then remove pins 2 and 3 from the top of the tube. Carefully lower the
mast to a bench or chair level with the cart.
CAUTION:
Ensure there is a minimum of 20 feet of clearance beside the Cart before lowering the mast.
4. Extend the mast to the desired height, locking each section in place as you go. (A minimum of 12 feet is
recommended.)
A. If you are not fully extending the mast, align the index holes of the non-extended sections and secure by
inserting pin 4. This prevents the mast from rotating while extended.
Pin 4
(Optional index pin; prevents mast rotation)
Pin 3
(Secures mast tube upright)
Pin 2
(Secures mast tube upright)
Pin 1
(Secures mast base in tube)
Figure 90: RT Mast Pin Locations
90o
Figure 91: Top View of RT Bracket and Antenna Direction