GAME DAY GUIDE - BASEBALL
SETUP AND OPERATION
BELTPACK OVERVIEW
Specifications
Battery Life:
12 hours
Charge Time:
3.5 hours from dead with USB cable. 6.5 hours from dead with
drop-in charger (sold separately). When charging, LED is red.
When charging is complete, LED is off.
LED Modes:
Blue (Double Blink) = Logged In
Blue (Single Blink) = Logged Out
Master Pack Indicator
Battery
Mode Indicator
Signal Strength
Home/Away Indicator
Talk Indicator
Lock Indicator
User Role
LEDs
Power Button
Talk Button
Headset Connection
USB Charger
Connection
/– Buttons
Mode Button
OLED Screen
Antenna
Channel Button
(and press and hold for Player
Channel Talk when applicable*)
* See the Operating Manual for more about operation with the Cobalt PLUS Player Receiver Pack.
Active Channel
Active Player Channels
Volume Level
Power on the beltpack.
Hold down the power button for 3 seconds, until the screen turns on.
On the Master beltpack, select Home
if you
are the home team or Away if you are the
visiting team.
Use the
+/–
buttons to toggle between the options.
(Selected option will blink.) Press and hold the mode
button to save your selection.
This setting provides proper wireless coordination for your other beltpacks and
between your team and another CoachComm Cobalt or Cobalt PLUS team.
Connect microphone and eartube or a headset to the beltpack.
Be sure to fully insert the connector.
Adjust beltpack volume as needed
with the +/– buttons.
Maintain optimal line of sight with other beltpacks.
The “
Head 0
” beltpack is the Master (identified with
“
M
” on the OLED) and is required for all beltpacks to
work. For best system performance, use the Master
in the dugout near other beltpacks.
1
