IMPORTANT: KEEP FOR FUTURE REFERENCE, READ CAREFULLY
1
This product has been designed and manufactured to comply with the Australian Safety Standard AS2088-2009.
safety precautions
Before assembling this adaptor, read and understand the instructions. Incorrect
assembly may make the adaptor unsafe. Do not use this adaptor if any part is
broken, torn or missing. Keep instructions in a safe place for future reference.
Warranty
Thank you for your purchase of this quality product from CNP Brands. To register your 12 month warranty and to
view our warranty conditions, visit
www.cnpbrands.com.au.
IMPORTANT
This adaptor is designed for (Orion/Strider/Cruiser) Car Seat; to be used with flat
fold stroller including the followings:
Childcare stroller models: Edge 3
Bebe Care stroller models: Edge 4
Left plastic
adaptor
Right plastic
adaptor
assembly contents
assembly/operating instructions
To attach adaptor
To remove stroller bumper
Insert the set of plastic adaptor into the side stroller frame’s
slots until it
‘clicks’
and locks into place.
In order to install brackets, first remove existing stroller
bumper bar.
This can be done by lifting and displacing the base of
the bumper bar outwards away from the stroller. While
displaced gently pull the bar towards yourself to remove it.
2
1
front
front
back
back
model # 121340-002
Lift outwards
