Operating Instructions
RaptorX-SL-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 43
Support: +49 (0)2831/91021-50
06.10.2010
4
Assembly and Commissioning
4 . 1
O v e r v i e w
Fig. 10: Raptor overview
1 Y-Axis with slide (Y-Bridge)
Chapter 4.3.1 “Y-Axis with Slide“, page
46
2 Cable channel
3 Z- Axis with slide
Chapter 4.3.2 “Z-Axis
“ page 47
4 Working table
5 X-Axis with slide
Chapter 4.3.3 “X-Axis
with Slide“ page 48
6 Operator station with software
Chapter 4.3.4 ”Operating Software“,
page 48
7 Controller
Chapter 4.3.5 “Controller”,
page 49
8 Accessory holder on Z-Axis (Movable)
Chapter 4.3.6 ”Accessory Holder“, page
50
9 Frame
