BAT32G1x9 user manual | Chapter 10 Timer M
378 / 1149
Rev.1.02
10.5.2
Output comparison function
This is the content of the detection TMi register (counter) (i=0, 1) and the TMGRji register (j=A, B, C , D)
whether the content is the same (comparative match) pattern. If the content is the same, output any level
from the TMIOji pin. Because of the TMIOji pin and the TMGRji
Registers are used in combination so that pin selection can be made for output comparison functions, or
other modes and functions. The block diagram and operation example of the output comparison function are
shown in Figures 10-49 and 10-50, respectively, and the specifications of the output comparison function are
shown in Table 10-13.
Figure 10-49 Block diagram of the output comparison function
P
x
x/
T
M
IO
A
0
/T
M
C
L
K
