page 16 of 30
All content © 2019, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
6.2.2.
Mounting to Panavision rods
1. Slide the clamp console onto the rail of the cPRO camin.
2. Open the clamp console by turning the thumbscrew counter-clockwise.
3. Remove the 19/15mm clamp insert.
4. Attach the CLM-4 Clamp Insert 5/8” (K2.72115.0) to the 5/8” rod.
5. Attach the clamp console around the clamp insert on the rod.
6. Close the clamp console by turning the thumbscrew clockwise.
NOTICE
A mounting option to Panavision rods is not included in the cPRO camin basic set. For this
K2.0006176 cforce mini clamp console 19/15mm and K2.72115.0 CLM-4 Clamp Insert
5/8” is required and needs to be ordered seperately.