CMT2380F17
Rev0.1 | 95/347
www.cmostek.com
Figure 14-4. Port 3 Open-Drain Output
14.1.5
General Analog Input Only Structure
The analog-input-only configuration on general port pins is the default setting. For ADC or Analog
Comparator input application, user may keep the port setting in this configuration. If apply the port pin to
digital function, user must program the port pin to associated configuration. The analog-input-only port
configuration is shown in Figure 14
–5.
Port
Pin
Input data
Digital I/O
Disabled
Analog Input
Figure 14-5. General Analog-Input-Only
14.1.6
General Open-Drain Output with Pull-up Resistor Structure
The open-drain output with pull-up resistor configuration on general port pins enables the on-chip pull-up
resistor in open-drain output mode.
The open-drain output with pull-up resistor port configuration is shown in Figure 14
–6.
VDD
Port
Pin
Very
weak
Weak
Input data
Port latch data
VDD
Figure 14-6. General Open-Drain output with Pull-up Resistor
14.1.7
General Open-Drain Output Structure
The open-drain output configuration on general port pins is the same function as port 3 open-drain output
mode. The general open-drain port configuration is shown in Figure 14
–7.
Summary of Contents for CMT2380F17
Page 27: ...CMT2380F17 Rev0 1 27 347 www cmostek com 1 25 Phase Noise...
Page 177: ...CMT2380F17 Rev0 1 177 347 www cmostek com Figure 17 3 PCA Interrupt System...
Page 246: ...CMT2380F17 Rev0 1 246 347 www cmostek com SnMIPS S0MI S1MI 1 P3 3 P4 7...
