Evaluation Kit for CMX7x6x
PE0601-xxxx
©
2011 CML Microsystems Plc
28
UM0601/2
6.3.3 Program Serial Memory
The serial memory device fitted to the PE0601 is a Numonyx or ST M25P10A 1Mbit SPI serial
Flash
or equivalent
. Loading a FI into this serial memory requires a "thick stub" application programme
EF0601_M25P10_10_xxxx.h
(or later version), where ‘xxxx’ is the ‘xxxx’ element of
PE0601-xxxx. For example, if using a PE0601-7163, then the thick stub programme to use is
EF0601_M25P10_10_7163.h.
The thick stub programme is available from the CML website.
Use the ‘Program Serial Memory’ tab:
•
Enter the name of the file containing the thick stub (
EF0601_M25P10_10_xxxx.h)
, or
navigate to the required file using the ‘Browse’ button. This file is in the same ‘C’ language
header format as the Function Image™.
•
Enter the name of the file containing the Function Image™, or navigate to the required file
using the ‘Browse’ button.
•
Select target board.
•
Click the ‘Load’ button.
Figure 7 – Program Serial Memory Tab
Shortly after pressing the ‘Load’ button, a message box will confirm that the application has
loaded the Thick Stub.