106
468
260
V
01 10/2013
GB
Storage and transport
Storage and transport
Storage
– Let the device cool down before you store it.
– Store the device as horizontally as possible. Make sure that no fuel-oil mixture can run out of
the carburetor.
Longer downtimes
– Empty the tanks for the fuel-oil mixture and saw chain oil.
– Start the motor and let it run until the motor switches off by itself (▸
– Let the motor cool down (approx. 5 min).
– Remove the spark plug (▸
Cleaning/replacing the spark plug – p. 105
– Let a teaspoon of clean two-stroke motor oil run into the combustion chamber.
– Pull the pull-starter slowly several times in order to coat the internal components with the oil.
– Replace the spark plug (▸
Cleaning/replacing the spark plug – p. 105
Transport in a vehicle
If you are transporting the device in a vehicle:
– Let the device cool down.
– Empty the tanks for the fuel-oil mixture and saw chain oil.
– Secure the device against slipping.
Faults and remedial measures
When something isn’t working…
DANGER!
Risk of injury!
Make sure that unauthorized persons do not have access to the device!
NOTICE!
Device damage!
If you are not going to be using the device for a while, remove the fuel and chain oil from
the device. This way, you will prevent a gumming-up of the motor and of the grease pump.
Store the device in a dry place and far away from possible sources of ignition such as
ovens, gas thermostats, etc.
WARNING!
Risk of injury!
Before transporting the unit, fit the protective cover over the saw rail.
DANGER!
Danger to life and limb!
Improper repairs can cause your device to stop functioning safely. This endangers yourself
and your environment.
Kettensaege_Benzin_468260_468261.book Seite 106 Montag, 7. Oktober 2013 11:09 11
