102
• Wear gloves when transferring fuel.
• When fuel has come into contact with your clothes, change them immediately. Clean your
clothes before putting them back on.
• Store fuels out of the reach of children.
When handled inappropriately, fuels may cause damage to the environment:
• Use caution when siphoning fuels. Fuel must never seep into the ground or the sewage sys-
tem.
• Dispose of any remaining fuel in an appropriate manner. Never dispose of fuel with regular
household waste.
• Fuels may be stored only for a limited time. Never buy more fuel than you plan on consum-
ing within the next few months.
Maintenance
• Before conducting any maintenance on the device, always set the ignition switch to [0] and
pull the ignition cable plug.
• Check the fuel system regularly for leaks or defective parts.
• Only those maintenance and fault elimination tasks described here may be carried out. Any
other tasks must be completed by a specialist.
• Only use original replacement parts. Only these replacement parts are designed and suit-
able for the device. Other replacement parts will not only lead to an invalidation of the war-
ranty, they may also endanger you and your environment.
Device-specific safety instructions
• Young people under 18 years of age and users who are not sufficiently acquainted with its
operation must not use the device
• Make sure that the device is assembled completely and according to regulations.
• Check that the product functions faultlessly, especially the correct and secure fit of the saw
rail and saw chain tensioned according to regulations.
• Check all screw connections regularly to ensure tight fit.
• Before use, ensure that there are no people or animals in the work area.
• Make certain that the work area is free of obstacles.
• Always keep an eye on your surroundings in order to ensure that you are not endangering
any people or animals with your work.
• No other persons or animals may be present within an area of 15 m around the cutting area,
as they may otherwise by hit by objects being slung away.
• Never work in poor light or weather conditions.
• Only saw wood. The product is not to be used for any purpose other than that intended.
• Keep the handles dry, clean and free of oil and grease. Greasy, oily handles are slippery
and cause loss of control.
• Avoid sawing in bushes, since here small branches may get caught in the saw chain and
they can fly out uncontrolled.
• Make sure that you can stand firmly and safely in each work position. When working on a
sloping subsurface, be especially careful!
• Always hold the product firmly in both hands and use the carrier belt. Use your right hand
to grip the rear handle and your left hand to grip the bar handle, even if you are left-handed.
Do not let go of the handles!
• When the saw is running, keep all body parts away from the saw chain. Make sure before
starting the saw that the saw chain does not touch anything.
GB
Kettensaege_Benzin_462226.book Seite 102 Mittwoch, 10. Oktober 2012 2:43 14
