CMi 401140, Original Instructions Manual

Page: 28 / 56

28
Disposal of the packaging
The packaging consists of card-
board and correspondingly marked
plastics that can be recycled.
– Make these materials available for recy-
cling.
Technical data
*) The specified values are emission values and
do not necessarily represent safe workplace
values. Although there is a correlation between
emission and immission levels, this cannot be
used to infer whether additional safety meas-
ures are necessary or not. Factors which affect
the current immission levels at the workplace,
include the type of room, other sources of
noise, e. g. the number of machines operating
and other processes taking place in the vicinity.
Permitted workplace values can differ from
country to country. This information is designed
to help the user to better assess the dangers
and risks.
**) The specified vibration emission value was
measured in accordance with a normed test
procedure and can be used in order to compare
one tool with another. The specified vibration
emission value can also be used for an intro-
ductory evaluation of the exposure. The vibra-
tion emission value may fluctuate from the
specified value during actual use of the power
tool. These fluctuations will depend on the way
in which the power tool is used. Try to keep
vibrations to a minimum. One method of reduc-
ing the vibration load is, for example, limiting
the length of time you work with the tool. All
parts of the operating cycle must be taken into
account for this purpose (for example, also
including times in which the power tool is
switched off and times in which it is switched
on, but is running without load).
Fuel and lubricants to be used
• Ordinary petrol, lead-free, 90 Octane If
there is no ordinary petrol available, use
petrol with a higher octane level.
• Gear oil: SAE 85W-90 – Motor oil: SAE
10W-30
Instructions for fuels
Fuels with ethanol mixtures (e. g. E10)
Fuels with high ethanol mixture are more
aggressive than fuels with less or without
ethanol mixture. Possibly painted surfaces
and plastics can be strongly affected or dam-
aged. Moreover, fuel with ethanol mixture
strongly reacts to influential factors such as
light rays, temperature and storage time.
Hence, these fuels should be stored only in
allowed containers and in suitable place for
not more than 30 days.
It is recommendable to empty the fuel tank
as well as the steam separator (carburettor) if
combustion engine takes longer time to shut-
down.
All Lux-devices are suitable for using the
E10-Fuel.
Accessories
Accessories are available at your local OBI
market.
Item number 401 140
Cubic capacity 86.7 cm³
Nominal motor output 1.7 kW
Max. motor speed 3600 min
-1
Tank volume 1600 ml
Oil tank capacity 400 ml
Dimensions of the chop-
ping tool ø26 × 55 cm
Noise output level (L
WA
)* 98 dB(A)
(K = 3 dB(A))
Noise pressure level
(L
PA
)*
83 dB(A)
(K = 3 dB(A))
Vibration** < 7 m/s²
(K = 1,5 m/s²)
Weight 32,5 kg
Spark plug E6TC
NOTICE!
Risk to the environment, fire haz-
ard!
Prevent damage from occurring due
to leaking fuel: Make sure the tank is
completely drained before disposing
of the device.
NOTICE!
Risk of product damage!
Never use Bio-Ethanol E85 as fuel!
GB
Motorhacke_401140.book Seite 28 Freitag, 18. Oktober 2013 8:30 08