OXIMETER
Product Overview
1.
Changing Batteries
3.
4. How to Use and Take
a Measurement
Display Screen
Navigation Key
Mode/OK
Power/Back
Recall/Mute
SpO
2
Probe
Connector
Screen Display
2.
Pulse rate
symbol
Pulse strength
bar graph
Sound
indicator
Patient Type
Current SpO
2
lower
alarm threshold
Current
time
SpO
2
Value
SpO
2
Mark
Pulse
Plethysmorgram
Pulse rate
value
Battery
indicator
Memory
full icon
Pulse Rate
Mark
Open the battery compartment
with a coin. Turn the screw
counter-clockwise to open.
Any questions?
Contact us at:
Email: [email protected]
Phone: 888-985-1125
Fax: 866-222-0128
cmihealth.com
Line up arrow signs, then insert cord.
Open cap and connect converter cable with the other end
of SpO
2
sensor.
Insert one finger into the sensor and start your
measurements.
Turn counter-clockwise
to open
1.
Replace all three old batteries
with three new batteries.
*Please DO NOT mix new and
used batteries or use
rechargeable AA batteries.
2.
Data interface
Reserved Port
