For Masonry Wood-burning Fireplaces
Installation & Operating Instructions
ATTENTION:
Installer please leave these Instructions with the homeowner.
Page 1: ...For Masonry Wood burning Fireplaces Installation Operating Instructions ATTENTION Installer please leave these Instructions with the homeowner ...
Page 2: ... Lintel Clamps by threading an adjusting nut onto each 6 bolt and adding the Lintel Bracket Figure 2 Thread the Lintel Clamp Bolts into the nuts welded onto the back of the CMC Wood Insert face Install the CMC Wood Insert into the fireplace and center it from side to side If the fireplace is pitched toward the back install the leveling bolts into the tabs inside the back corners of the CMC Wood In...
Page 3: ...Do not use the OFF function unless the Snap Disk fails and the blower continues to run when the fire is cold If the Snap Disk fails have it replaced immediately by Fireplace Doors Online BURNING Build and maintain small to moderate fires Keep burning logs and hot embers behind the log retainer included with the CMC Wood Insert Do not burn a fire without the log retainer installed Regulate the fire...
Page 4: ...in materials or workmanship at no charge exclusive of freight subject to the limitations of this warranty This warranty covers repair or replacement of parts only and applies exclusively to products purchased for consumer use This warranty does not cover damage caused by transportation and or handling or which re sults from alteration accident misuse abuse or improper installation It also makes no...
